서 론
가새(Brace)는 주로 좌·우의 두 기둥과 상·하의 보 또는 토대로 짜인 직사각형 벽체 뼈대의 한 편 모서리에서 다른 편 모서리로 빗대어서 건물의 내진성, 내풍성 등을 높여주는 중요한 부재이다. 가새 골조와 MomentResist Rigid Frame(MRF)은 20세기 초반, 고층 건물의 시작과 함께 발전되어 왔다. 오늘
steel industry.
There are manifold steel products. But, briefly, they can be classified as “steel plates” for making manufactured goods such as cars, ships and “frame products” for construction. INI steel has primarily produced “frame products” and began to make steel plates in 2005.
On the contrary, there have not been important movements for overseas market. In 2000, INI Steel b
(1) Project Objective
To develop a new commercial product that is valuable, feasible, and practical in the real market.
(2) Deciding The Market for The New Product
In this world, there are myriad markets, consumers, products. However, considering our company's technologies(internal factor) and marketability(external factor), we chose the market of kitchen utensils for our new product.
Ⅳ. 철골의 접합
1. 철골구조의 부재
(1) 보
강재의 단면형상에서 보 등의 휨재에서 휨 내력을 주로 받는 부분을 플랜지 (flange)라 하고 전단내력을 받는 부분을 웨브(web)라 한다. 보는 휨응력에 저항하므로, 플랜지의 살 두께를 두껍게 하는 한편 플랜지와 플랜지의 사이의 간격을 멀리하는 쪽이 효율이
- 최상 교통 인프라로 ‘왕좌’를 노린다 - 서면
행정구역상 부산진구 부전동 일대에 속하는 서면은 1980년대 대형 금융업체와 건축자재, 기계공구를 취급하는 도매상가가 자리 잡으며 상권의 면모를 갖추기 시작했다. 1990년대 접어들며 서면 일대의 학교와 학원을 중심으로 분식점, 만화방, 당구장
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
1. 로마의 사회주의자 청년
1883년 7월 29일 프레다피오에서 대장장이의 아들로 출생, 사범학교 재학
1901년: 초등학교 교사로 재직
1902년: 사회주의 운동에 적극적으로 참여
1909년: ‘라첼레 구이디’와 결혼.
1912년: 사회당 집행위원 및 당기관지 “전진”(Avanti) 편집장
2. 참전 이후 귀향, 파쇼의
The reason for our selecting Mittal Steel descends to one key question. How did a company which a few decades ago was only a single steel producing mill in India become the world’s largest and most global company? Mittal Steel, the world’s number one steel producer since 2005 achieved its success by taking a strategy, which in the past, was a drastic change for the industry – this was t
3. 증기 터빈의 효율 향상 방안
그림3-1. Steam Path Loss[1] 그림3-2. Leakages[1]
위에서 그림3-1은 스팀 터빈이 구동하는 중에 Steam Path에서 발생되는 손실 요인들에 대해서 나타내고 있다. 손실 중 50%로 가장 많은 부분을 차지하고 있는 것은 누설 손실로, 세부적으로는 블레이드 상단으로 누설